Bay leaves Mesh belt Drying Oven(Dryer Oven Machine)for food stuff , pharmaceutical
Principle
After filtering and heating, the air enters into air distributor on top of the drier. The hot air enters into the drying room in spiral form and uniformly. By passing through high-speed centrifugal atomizer on top of tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads. Through the very short time of contacting with heating air, the material can be dried into final products. The final products will be discharged continuously from the bottom of drying tower and from cyclone separator. The waste gas will be discharged from exhaust fan.
The equipment merits:
1). Mesh belt rotational speed:According to the material dry degree, may adjust the mesh belt transfer speed.
2). Temperature: The dryer various units dry temperature may adjust;
3). Uses the great amount of wind relative low temperature to be dry, maintains the material primary color and the ingredient effectively;
4). Low humidity heated air circulation use, highly effective energy conservation.
Application :
De-watering vegetable, particle feed, gourmet powder, shredded coconut stuffing, organic color, compound rubber, medicine product, medicine material, small wooden product, plastic product, aging and solidification for the electronic component and device..
The materials are uniformly distributed on the mesh-belt by the material feeder. The mesh-belt generally adopts 12-60 mesh stainless steel mesh and it is drawn by a transmission device and move inside the dryer. The dryer is composed of several sections. For each section the hot air is circulated separately. Part of exhausted gas is exhausted by a special moisture exhaust blower. The waste gas is controlled by an adjustment valve. The hot air passes through the mesh-belt covered with bring water material away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material property. The final products after the drying process will fall into the material collector continuously. The top and low circulation units can be freely equipped according to client requirement;
| Model | DW-1.2-8 | DW-1.2-10 | DW-1.6-8 | DW-1.6-10 | DW-2-8 | DW-2-10 |
| Unit number | 4 | 5 | 4 | 5 | 4 | 5 |
| Belt width | 1.2 m | 1.2m | 1.6m | 1.6m | 2m | 2m |
Drying section
length | 8mm | 10mm | 8mm | 10mm | 8mm | 10mm |
Thickness of
the material
to be covered | 10-80mm | 10-80mm | 10-80mm | 10-80mm | 10-80mm | 10-80mm |
| Temperature | 60-130°C | 60-130°C | 60-130°C | 60-130°C | 60-130°C | 60-130°C |
| Steam pressure | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa | 0.2-0.8Mpa |
| Steam consumption | 120-300kg/h | 150-375kg/h | 150-375kg/h | 170-740kg/h | 180-500kg/h | 225-600kg/h |
| Drying time | 0.2-1.2h | 0.25-1.5h | 0.2-1.2h | 0.25-1.5h | 0.2-1.2h | 0.25-1.5h |
| Drying strength | 60-160 kg H2O/h | 80-220 kg H2O/h | 75-220 kg H2O/h | 95-250 kg H2O/h | 100-260 kg H2O/h | 120-300 kg H2O/h |
Total power of
the blower | 9.9kw | 12.1kw | 9.9kw | 12.1kw | 18.2kw | 22.2kw |
Total power of
the equipment | 11.4kw | 13.6kw | 11.4kw | 13.6kw | 19.7kw | 23.7kw |
Product Tags:
|
|
Bay Leaves Infrared Industrial Drying Ovens Machine , Laboratory Drying Cabinet Images
|
